How to assemble and use controller / control unit / C-TOP

17 Fri 2023

Cotroller / control unit / C-TOP, including signal transmission and LED position indicating light, is used for controlling process valve of all kinds. Information collection is come from PLC or other automatic control equipment which could turn the valve on & off and reflect position of the valve simultaneously.

Power supply	DC24V +/-10%
Input signal setting	0/4 to 20mA and 0 to 5/10V
Output signal and resistance	0/4 to 20mA 180Ω
	0 to 5/10V 180Ω
Sensor input	0/4 to 20mA (180Ω input resistance)
	frequency 0 to 1000Hz (17kΩ input resistance)
	PT100 -20 to +220℃ (resolution < 0.1℃)
Ambient temperature	0 to +55℃
Pilot air ports	Hose size φ6-8mm threaded ports G1/8
Supply pressure	Low air flow rate 0 to 7bar
	High air flow rate 3 to 7bar
Air input filter	Exchangeable (mesh aperture ~ 0.1mm)
Actuator	Suitable for 70mm, 86mm, 114mm, 130mm, 168mm
Stroke range valve spindle	3 to 60mm (3 to 60mm on request)
Pretection class	IP65/67 according to EN 60529 (NEMA4xin preparation)
Power consumption	< 2W
Electrical connection
1) Multipole connection	M12X1, 8-pins or 5-pins
2) Cable gland	M16X1, 5 (φ 5-8mm) on terminal screws (1,5mm2)
Bus communication	MODE BUS RS485